WHAT YOU NEED:
- 3 x 2.4m lengths of Porta 30mm x 18mm dressed pine (486cm total required).
- Dulux sample pots in 6 colours – ‘Water Raceway’, ‘Orangeade’, ‘Sharp Yellow’, ‘Tsunami’, ‘Zeftron’, and ‘Colossus’
- Irwin Jack Plus tenon saw • Haron timber mitre box
- Uni Pro sanding block
- Painters Flexovit abrasive paper for sanding
- Monarch canvas drop sheet
- ABC synthetic bevelled liner brushes 18mm
Use a mitre box and saw to cut 54 x 9cm lengths of 30 x 18mm dressed pine. (If using timber of another dimension, be sure to cut lengths that are three times the width of the timber.)
Sand all edges of each 9cm block with light sandpaper.
Use colour samples pots to paint the blocks, 9 of each in 6 different colours on all surfaces.
Allow to dry and you’re ready to stack and play.
Related stories
Native ad body.
Sponsored by %%sponsor_name%%
Native ad body.
Sponsored by %%sponsor_name%%
Native ad body.
Sponsored by %%sponsor_name%%
Native ad body.
Sponsored by %%sponsor_name%%