Advertisement
Home HOMES DIY

How to fill a large hole in timber

Patch them up in a day's work.
Loading the player...

Removed some doors as part of a quick renovation but now you’re stuck with some unsightly holes? There’s no need to call a tradie. With a few supplies from your local hardware store, you can patch these holes up in no time.

Advertisement

WATCH: How to fix a hole in timber (plus some other handy hints!)

Have you noticed some cracks appearing on the walls in your home recently? This is completely normal especially if you have an older home. But this shouldn’t stop you from getting started on a renovation.

Instead of knocking out the walls which is a much larger task, how about removing the connecting doors? The only thing to keep in mind is that it may leave you with a few unwanted holes in the jamb where the latch fittings and hinges used to sit. But not to worry as this is an easy fix with some filler and paint.

timber hole
Before

Gather your supplies

• Epoxy filler
• Undercoat
• Enamel paint to match your door jamb

You’ll also need

  • Screwdriver
  • Sharp knife or chisel
  • Narrow scraper
  • Sandpaper
  • Paintbrush

Here’s how

Step 1

Unscrew or pry off old striker plate from door and remove. Using a sharp knife or chisel, remove any paint in hole left behind to expose timber.

Step 2

Mix two-part epoxy filler to product instructions. Mix in small batches but don’t use too much hardener or it will go hard in minutes.

Step 3

Using a narrow scraper, force filler into hole, making sure it is fully filled. Scrape excess filler off so it sits just below surface of surrounding timber. Leave to harden.

scrape off timber
Advertisement

Step 4

Mix another small batch of filler and use as a skim coat over hardened filler. Apply with scraper but don’t overfill as this filler is difficult to sand.

mix filler timber hole

Step 5

Sand hardened filler and surrounding timber together to make them flush. You may have to do another skim coat if filler is still below level of timber.

holes timber sanding
Advertisement

Step 6

Using a paintbrush, undercoat filled area and follow with 2 coats enamel paint. Allow to dry and sand lightly between all 3 coats.

timber paint

The before and after!

The before and after!

You might also like:

Advertisement

Everything you need to know for your kitchen renovation

BHG’s all-time best budget bathroom renovations

How to create a tiled splashback

Advertisement

Related stories


Advertisement
Advertisement