Advertisement
Home Garden

How to build a raised vegie garden with recycled timber pallets

Use recycled timber planks for the frame, then start growing your own!
Loading the player...

Longing to make a raised vegetable garden in your backyard?

Advertisement

While you can buy ready-made vegie garden kits from hardware stores and garden centres, untreated timber pallets are just the trick for this easy-to-DIY project, as is any leftover untreated lengths of hardwood timber you might have in the shed.

WATCH: Charlie makes wicking beds out of old wine barrels

Just frame up the raised vegie bed, line with weedmat, fill with potting mix and plant up. You’ll be saying g’day to homegrown vegies and herbs in no time!

Gather your supplies

  • Decommissioned, untreated hardwood timber pallets (1-2)
  • Drill, bits  and exterior screws or hammer and nails
  • Spirit level
  • Staple gun and staples
  • Weedmat
  • Potting mix, to suit
Staple gun sitting on top of timber pallet
(Credit: Getty)
Advertisement

Here’s how

Step 1

Pull apart your pallets and discard any components you won’t be using, including old fixings. You need 8 long timber slat lengths and 4 short timber lengths (to be used as vertical supports).  

Step 2

Decide on size of raised vegie garden, using long timber slat lengths as a guide. Drive a vertical support into the ground at each corner (you can use garden stakes for this, if you wish). Vertical supports or stakes should stand three slat-widths above ground level.

Step 3

Screw or nail long slats to verticals on all four sides. Leave a gap, then screw or nail four more long slats, flush with top of verticals. Keep all slats level using spirit level.

There’s no need to fuss too much about making your frames perfect – it’s all part of the charm! (Credit: Getty)
Advertisement

Step 4

Line the vegie garden frame with weedmat. Trim weedmat to fit, if necessary, then staple it close to the top edge of the top slats on all four sides.

Step 5

Fill the vegie garden frame with suitable potting mix, then get set to plant up!

Step 6

Start with one raised vegie garden, then expand your crop capabilities by adding more beds as you see fit. You can replace verticals and slats as they deteriorate over time, as required.

Advertisement

Related stories


Advertisement