Step 1 Use tape measure and set-out paint to mark positions of steppers.
Step 2 Using shovel, excavate soil to depth of 100mm (to accommodate 50mm bed of mortar and 50mm paver). Repeat for each position of stepper
Step 3 Prepare mortar mix in wheelbarrow. Scoop into hole using brickie’s trowel. Use flat trowel to smooth and flatten to a depth of 50mm.
Step 4 Lay pavers in desired pattern (we used basketweave). Gently tap into place with mallet and check level. Use brickie’s trowel to smooth mortar over edge of pavers.
You may also like