Lush green lawn looks great, but if you want to turn it into a feature in its own right, consider paving it with patterns. All it takes is a few short, simple steps to create a fun or elegant talking point – and provide a handy base to stop your outdoor table and chairs from sinking into the ground!
Gather your supplies
• Pavers (we used Brighton Masonry Mypave Paver 400 x 400 x 40mm in Charcoal)
• Brickie’s sand
You’ll also need
Rubber mallet; stakes; sponge; measuring tape; stringline; shovel; trowel; spirit level
Hammer in stakes 500mm from edge of lawn on both sides. Run stringline between sides. Use line to ensure your first row of pavers is straight.
Position pavers across lawn, along stringline, spaced roughly 600mm apart. Repeat for next row, but offset by a paver before positioning. Continue positioning pavers for subsequent rows, removing 1 paver after row 3 and additional pavers in subsequent rows, so pavers look like they’re fading away into a corner (see pic). If desired, run a stringline diagonally across paving to ensure corners are aligned.
Once satisfied with position of pavers, use shovel to cut around paver into lawn. Remove paver and turf, then excavate to depth of 100mm.
In a wheelbarrow, mix 4 parts cement and 1 part brickie’s sand. Slowly add water and stir until mixture is stiff. Shovel a bed of mortar into paver hole and spread with trowel.
Wash back of paver with water and sponge. Lay damp face on top of mortar and tap with mallet. Use spirit level to check paver is level with lawn.
Repeat to set all pavers into lawn. Once finished, wash pavers to remove excess mortar.