What you’ll need
Scrubbing brush
Paintbrush
Here's how
1 PREPARE MIXTURE Shake pouch from side to side then place it on the ground and roll it from Part A side to Part B to break seal in the middle. Shake pouch and squeeze in from edges for 3 minutes to combine and activate the mix.
2 POUR OUT FIRST RIBBON Snip a corner of the pouch, then about 300mm from back wall, pour out a 60mm-wide ribbon of mix about 1m long.
3 CUT IN AROUND EDGES Working quickly to cover areas about 1.2m square, use a brush to first push mix to edges of floor in back corner of garage.
4 ROLL OUT FINISH Using a foam roller, distribute mix evenly in a W motion. Pour next ribbon 600mm from finished section and roll out another 1.2m square, overlapping the edges. Leave finish to cure for 24 hours before driving onto it.
