More than just a track to your door, a path is an essential ingredient of a garden’s design, showing visitors their route. So, direct the traffic at your place with a simple wide walkway. This path has been built using large rectangular pavers with a border of contrasting smaller pavers.
Lead your visitors up an inviting garden path...
GATHER YOUR SUPPLIES
• Road base
• Paving sand
• Pavers (we used charcoal 200 x 100mm Havenbrick pavers and 450 x 300mm Stradascape pavers)
• Sand and cement mix/mortar mix
• Jointing sand
YOU’LL ALSO NEED
Plate compactor (hired); rubber mallet; stringline; straightedge; spirit level; float and/or trowel; tape measure; shovel; broom; rake; set-out paint; brick saw (hired – optional)
Use tape measure and set-out paint to mark out path shape. Ours is 1525mm wide (1125mm with 200mm border header course).
Excavate soil to a depth of 150mm. Spread road base to a depth of 80mm, then use plate compactor to compact down to 70mm.
Spread 30mm bed of paving sand over road base. Before screeding, use paver to establish correct height level against bordering surface. Set up a stringline along lawn borders to keep edge straight.
Use straightedge to screed sand down to correct level, checking periodically with spirit level.
Starting at end of path, lay header course of border pavers (200 x 100mm). Use spirit level to ensure they’re straight, then tap into position with mallet. Continue laying border pavers along side of path.
Lay large rectangular pavers (450 x 300mm). The pattern used here required cutting pavers to fit and a brick saw was hired for this purpose.
Lay border pavers along other side. Mix up a batch of sand and cement mix to haunch sides, spreading mix on a 45° angle.
Sweep jointing sand over surface to fill gaps between pavers.