One of the most common places to have a hole in the wall is behind a door. Patching it up is a straightforward process, especially when everything you need comes in a handy kit. Then, install a doorstop to prevent it from happening again!
WATCH: How To Paint A Wall
Searching for a quick, affordable and simple way to fix that hideous hole in your wall? Here’s our step-by-step guide to help you get your living room looking good as new.
Gather your supplies
- Gyprock Rapid Repair Kit (includes patching compound, self‑adhesive mesh tape and broad knife)
You’ll also need
- Utility knife
- Fine sandpaper
- Vacuum
- Acrylic undercoat
- Interior acrylic to match the wall colour
- Painting equipment
- Doorstop
Here’s how
Step 1
Remove any loose plaster from around hole. To provide a key for patching compound, score lines in plaster wall where it will be patched.
Step 2
Mix patching compound following packet instructions. Fill hole with compound so it finishes flush with wall. Leave to dry.
Step 3
Cut a strip of selfadhesive mesh tape and press onto wall over hole. Mix up more compound and spread over tape so it just covers it. Feather edges of compound to surrounding wall and leave to dry.
Step 4
Mix and then apply a second layer of compound slightly wider than the first. Feather edges then leave to dry.
Step 5
Lightly sand-dried compound to make smooth and blend new work with surrounding wall. Remove dust with vacuum.
Step 6
Apply undercoat to patch. Let dry then apply 2 coats of interior acrylic, allowing paint to dry after each coat.
Step 7
Install a doorstop behind the door to prevent the hole happening again.
You may also like
You might need
Related stories
5 things every homeowner needs before starting a renovation
Native ad body.
Native ad body.
Planning a renovation? Don’t start without this in your toolkit.
Native ad body.
How to make your house the best house on the block
